① Loosen the ash: Pour the ash into the incense burner to 2/3 of the position, and gently loosen the ash with the incense burner.
② leveling ash: the ash with a ball-shaped ash pressure to flatten the ash, be careful not to press too solid, otherwise the powder can not be sequentially burned out, there will be a half-burning on the disconnection of the situation.
③ Clean up the furnace wall: with feather dust or incense broom will be incense ash on the wall of the incense burner swept clean
④ Put the seal mold: will have a good luck pattern of the seal mold, gently put into the incense burner in the center of the incense ash, the position of the center
⑤ Put incense powder: use an incense spoon to take Hainan incense powder from the incense powder box and put it into the seal mold above the gap, according to the size of the seal mold pattern in order to put in 2-3 spoons can be
⑥Fill in the powder: Use the spatula to gently fill the powder into the gap of the seal mold, and put the excess powder back into the powder box.
⑦ Remove the seal mold: Gently lift the seal mold from the incense burner, be careful not to move it from side to side.
⑧Light the incense: Pick a piece of incense, light it and then use the incense to ignite the powder end of the incense.